Hammer crusher is a kind of equipment with good performance. The structure is designed to be reasonable, the crushing action is strong, the output is large, the comprehensive economic performance is good, and the material is crushed finely. Favored by…
The glass bottle crusher, as its name implies, is a crushing equipment for crushing glass bottles. Here is the crushing effect of the double roll crusher, which is mainly composed of a motor, two sets of toothed rollers, a toothed…
Nowadays, most of the sand on the market is machine-made sand. Machine-made sand is the sand obtained by crushing stones. Its mining is easy to be unrestricted, the cost is low, the quality of the finished product is good, the…
A fine screen refers to a screen with a screen opening of less than 1 mm. In the concentrator, the fine screen can be used as equipment for screening, classification and dehydration. For example, in the magnetic separation plant, the…
The two rollers of the double roll crusher are driven by two motors respectively and rotate in opposite directions. The ore is fed from the upper part, and the crushing is carried out in the gap formed between the two…
The impact crusher is an efficient crushing equipment. The ore is fed in from the feed port and slides down the screen. The ore on the screen is crushed by the carbide hammer on the high-speed rotating rotor during the…
Cone crusher has the characteristics of large crushing ratio, high efficiency, low power consumption, uniform product size and suitable for crushing hard ore. The cone crushers currently produced in China are divided into three types: standard type, intermediate type and…
The fixed lining plate (tooth plate), movable jaw lining plate (tooth plate), and both side lining plates (guard plates) of the jaw crusher are easy to wear. After severe wear, the product granularity becomes larger. In the initial stage of…
The most common crushing process in ore concentrators is a three-stage closed-circuit crushing process of coarse, medium, and fine crushing plus screening operations, but there are also two open-circuit or closed-circuit crushing processes. The first stage of the three-stage crushing…
In the crushing process, in order to avoid collapse and reduce costs, the principle of “more crushing and less grinding” should be possible. In ore dressing plants, two-stage or three-stage crushing is generally used. According to the different particle size…
1. what kind of stone do you want to crush?
2. what’s the size of your stone before crush ? how many inch or mm ?
3. what’s your requirements of final product size ? how many inch or mm ?
4. what’s your requirements of production capacity ? how many ton per hour ?
5.what is your whatsapp or wechat ?it is faster for us to send you more detail and photos.
Many thanks for your trust, we can provide you with proposal chart for complete production lines Crusher, spot inspection and operator training according to your demands and the conditions of applied spot, we can help you choose the right equipment.
30% prepayment by T/T, after the seller finish the production process and buyer verify the machine, 70% balance should paid before delivery, L/C is also acceptable.
We offer wear parts to our customer with our most favorable price. If there are problems youcould not handle, we will send our technicians to your place and you are therefore, responsible for all thecost involved.
Africa : 30-45 days
Asia : 5-25 days
America : 15-40 days
Europe : 30-40 days
12 months warranty for all kinds of products.